
hledger(1)                   hledger User Manuals                   hledger(1)



NAME
       hledger - a command-line accounting tool

SYNOPSIS
       hledger [-f FILE] COMMAND [OPTIONS] [CMDARGS]
       hledger [-f FILE] ADDONCMD -- [OPTIONS] [CMDARGS]

DESCRIPTION
       hledger  is  a  cross-platform program for tracking money, time, or any
       other commodity, using double-entry accounting and a  simple,  editable
       file  format.   hledger  is  inspired  by  and  largely compatible with
       ledger(1).
       Tested on unix, mac, windows, hledger aims to be a reliable,  practical
       tool for daily use.

       This is hledger's command-line interface (there are also curses and web
       interfaces).  Its basic function is to read a plain text file  describ-
       ing financial transactions (in accounting terms, a general journal) and
       print useful reports  on  standard  output,  or  export  them  as  CSV.
       hledger can also read some other file formats such as CSV files, trans-
       lating them to  journal  format.   Additionally,  hledger  lists  other
       hledger-*  executables found in the user's $PATH and can invoke them as
       subcommands.

       hledger reads data from one or more files  in  hledger  journal,  time-
       clock,  timedot,  or  CSV format specified with -f, or $LEDGER_FILE, or
       $HOME/.hledger.journal          (on          windows,           perhaps
       C:/Users/USER/.hledger.journal).  If using $LEDGER_FILE, note this must
       be a real environment variable, not a shell variable.  You can  specify
       standard input with -f-.

       Transactions  are  dated movements of money between two (or more) named
       accounts, and are recorded with journal entries like this:

              2015/10/16 bought food
               expenses:food          $10
               assets:cash

       For more about this format, see hledger_journal(5).

       Most users use a text editor to edit the journal, usually with an  edi-
       tor mode such as ledger-mode for added convenience.  hledger's interac-
       tive add command is another way to record  new  transactions.   hledger
       never changes existing transactions.

       To  get  started,  you  can  either save some entries like the above in
       ~/.hledger.journal, or run hledger add and follow  the  prompts.   Then
       try  some commands like hledger print or hledger balance.  See COMMANDS
       and EXAMPLES below.

EXAMPLES
       Two simple transactions in hledger journal format:

              2015/9/30 gift received
                assets:cash   $20
                income:gifts

              2015/10/16 farmers market
                expenses:food    $10
                assets:cash

       Some basic reports:

              $ hledger print
              2015/09/30 gift received
                  assets:cash            $20
                  income:gifts          $-20

              2015/10/16 farmers market
                  expenses:food           $10
                  assets:cash            $-10

              $ hledger accounts --tree
              assets
                cash
              expenses
                food
              income
                gifts

              $ hledger balance
                               $10  assets:cash
                               $10  expenses:food
                              $-20  income:gifts
              --------------------
                                 0

              $ hledger register cash
              2015/09/30 gift received   assets:cash               $20           $20
              2015/10/16 farmers market  assets:cash              $-10           $10

       More commands:

              $ hledger                                 # show available commands
              $ hledger add                             # add more transactions to the journal file
              $ hledger balance                         # all accounts with aggregated balances
              $ hledger balance --help                  # show detailed help for balance command
              $ hledger balance --depth 1               # only top-level accounts
              $ hledger register                        # show account postings, with running total
              $ hledger reg income                      # show postings to/from income accounts
              $ hledger reg 'assets:some bank:checking' # show postings to/from this checking account
              $ hledger print desc:shop                 # show transactions with shop in the description
              $ hledger activity -W                     # show transaction counts per week as a bar chart

       With the journal

              2016/02/16 Member Fee Payment John Doe
                  assets:bank account                                   2 EUR
                  income:member fees                                  -2 EUR
                    ; member: John Doe

       the --pivot comand will output the following:

              $ hledger bal --pivot member
                  2 EUR  assets:bank account
                 -2 EUR  member:John Doe

OPTIONS
       To see general usage and the command list: hledger -h or just  hledger.
       To see usage for a specific command: hledger COMMAND -h.

       hledger has several kinds of options:

       o General  options  are always available and can appear anywhere on the
         command line.  hledger -h shows these.  Eg: hledger --version.

       o Common reporting options are available with most commands.  These and
         all   other  non-general  options  must  be  written  after  COMMAND.
         hledger COMMAND -h shows these.  Eg: hledger register --cleared.

       o Command-specific  options  are  also  provided  by   some   commands.
         hledger COMMAND -h  shows these too.  Eg: hledger register --average.

       o Some hledger commands come from separate  add-on  executables,  which
         have  their  own  options.  hledger COMMAND -h shows these, as usual.
         Such options, if not also supported by  hledger,  should  be  written
         following  a  double  hyphen  argument  (--) so that hledger's option
         parser does  not  complain.   Eg:  hledger ui -- --register=checking.
         Or,  you  can  just  run  the  add-on  directly:  hledger-ui --regis-
         ter=checking.

       Command arguments may also follow the  command  name.   In  most  cases
       these  specify  a  query  which  filters the data.  Command options and
       arguments can be intermixed.

       Option and argument values containing problematic characters should  be
       escaped with double quotes, backslashes, or (best) single quotes.  This
       means spaces, but also characters which are significant to your command
       shell,    such    as    less-than/greater-than.    Eg:   hledger regis-
       ter -p 'last year' "accounts receivable (receiv-
       able|payable)" amt:\>100.

       Characters  which  are  significant  to  the  shell and also in regular
       expressions, like parentheses, the pipe symbol  and  the  dollar  sign,
       must  sometimes  be  double-escaped.   Eg,  to match the dollar symbol:
       hledger balance cur:'\$' or hledger balance cur:\\$.

       There's more..  options and arguments being passed  by  hledger  to  an
       add-on executable get de-escaped once in the process.  In this case you
       might    need    triple-escaping.     Eg:    hledger ui cur:'\\$'    or
       hledger ui cur:\\\\$.

       If in doubt, keep things simple:

       o write options after the command

       o enclose problematic args in single quotes

       o if needed, also add a backslash to escape regexp metacharacters

       o run add-on executables directly

       If you're really curious, add --debug=2 for troubleshooting.

       General options:

       -h     show general usage (or after COMMAND, the command's usage)

       --help show  the  current  program's  manual as plain text (or after an
              add-on COMMAND, the add-on's manual)

       --man  show the current program's manual with man

       --info show the current program's manual with info

       --version
              show version

       --debug[=N]
              show debug output (levels 1-9, default: 1)

       -f FILE --file=FILE
              use a different input file.  For stdin, use -

       --rules-file=RULESFILE
              Conversion  rules  file  to  use  when  reading  CSV   (default:
              FILE.rules)

       --alias=OLD=NEW
              display accounts named OLD as NEW

       -I --ignore-assertions
              ignore any failing balance assertions in the journal

       Common reporting options:

       -b --begin=DATE
              include postings/txns on or after this date

       -e --end=DATE
              include postings/txns before this date

       -D --daily
              multiperiod/multicolumn report by day

       -W --weekly
              multiperiod/multicolumn report by week

       -M --monthly
              multiperiod/multicolumn report by month

       -Q --quarterly
              multiperiod/multicolumn report by quarter

       -Y --yearly
              multiperiod/multicolumn report by year

       -p --period=PERIODEXP
              set  start date, end date, and/or reporting interval all at once
              (overrides the flags above)

       --date2
              show, and match with -b/-e/-p/date:, secondary dates instead

       -C --cleared
              include only cleared postings/txns

       --pending
              include only pending postings/txns

       -U --uncleared
              include only uncleared (and pending) postings/txns

       -R --real
              include only non-virtual postings

       --depth=N
              hide accounts/postings deeper than N

       -E --empty
              show items with zero amount, normally hidden

       -B --cost
              show amounts in their cost price's commodity

       --pivot TAG
              will transform  the  journal  before  any  other  processing  by
              replacing  the  account name of every posting having the tag TAG
              with content VALUE by the account name "TAG:VALUE".
       The TAG will only match if it is a full-length match.  The  pivot  will
       only  happen  if  the TAG is on a posting, not if it is on the transac-
       tion.  If the tag value is a multi:level:account:name the  new  account
       name will be "TAG:multi:level:account:name".

       --anon show anonymized accounts and payees

   Multiple files
       You  can specify multiple -f/--file FILE options.  This is like combin-
       ing all the files into one, except they  can  have  different  formats.
       Also  directives and aliases in one file do not affect subsequent files
       (if you need that, use the include directive instead).

   Repeated options
       Otherwise, if a reporting option is repeated, the last one takes prece-
       dence.  Eg -p jan -p feb is equivalent to -p feb.

   Depth limiting
       With  the --depth N option, commands like account, balance and register
       will show only the uppermost accounts in  the  account  tree,  down  to
       level N.  Use this when you want a summary with less detail.

   Smart dates
       hledger's user interfaces accept a flexible "smart date" syntax (unlike
       dates in the journal file).  Smart dates allow some english words,  can
       be  relative  to today's date, and can have less-significant date parts
       omitted (defaulting to 1).

       Examples:


       2009/1/1,      2009/01/01,   simple dates, several sep-
       2009-1-1, 2009.1.1           arators allowed
       2009/1, 2009                 same as above - a  missing
                                    day or month defaults to 1
       1/1,     january,     jan,   relative   dates,  meaning
       this year                    january 1 of  the  current
                                    year
       next year                    january 1 of next year
       this month                   the  1st  of  the  current
                                    month
       this week                    the most recent monday
       last week                    the  monday  of  the  week
                                    before this one
       lastweek                     spaces are optional
       today, yesterday, tomorrow

   Report intervals
       A report interval can be specified so that commands like register, bal-
       ance  and  activity will divide their reports into multiple subperiods.
       The  basic  intervals  can  be  selected  with   one   of   -D/--daily,
       -W/--weekly,  -M/--monthly,  -Q/--quarterly, or -Y/--yearly.  More com-
       plex intervals may be specified with a period expression.

   Period expressions
       The -p/--period option accepts period expressions, a shorthand  way  of
       expressing  a start date, end date, and/or report interval all at once.

       Here's a basic period expression specifying the first quarter of  2009.
       Note,  hledger  always treats start dates as inclusive and end dates as
       exclusive:

       -p "from 2009/1/1 to 2009/4/1"

       Keywords like "from" and "to" are optional, and so are the  spaces,  as
       long  as you don't run two dates together.  "to" can also be written as
       "-".  These are equivalent to the above:


       -p "2009/1/1 2009/4/1"
       -p2009/1/1to2009/4/1
       -p2009/1/1-2009/4/1

       Dates are smart dates, so if the current year is 2009,  the  above  can
       also be written as:


       -p "1/1 4/1"
       -p "january-apr"
       -p "this year to 4/1"

       If you specify only one date, the missing start or end date will be the
       earliest or latest transaction in your journal:


       -p "from 2009/1/1"   everything  after  january
                            1, 2009
       -p "from 2009/1"     the same
       -p "from 2009"       the same
       -p "to 2009"         everything  before january
                            1, 2009

       A single date with no "from" or "to" defines both  the  start  and  end
       date like so:


       -p "2009"       the  year 2009; equivalent
                       to "2009/1/1 to 2010/1/1"
       -p "2009/1"     the month of jan;  equiva-
                       lent   to   "2009/1/1   to
                       2009/2/1"
       -p "2009/1/1"   just that day;  equivalent
                       to "2009/1/1 to 2009/1/2"

       The  argument  of  -p  can  also  begin  with, or be, a report interval
       expression.  The basic report intervals  are  daily,  weekly,  monthly,
       quarterly, or yearly, which have the same effect as the -D,-W,-M,-Q, or
       -Y flags.  Between report interval and start/end dates  (if  any),  the
       word in is optional.  Examples:


       -p "weekly from 2009/1/1 to 2009/4/1"
       -p "monthly in 2008"
       -p "quarterly"

       The  following  more  complex  report  intervals  are  also  supported:
       biweekly,     bimonthly,      every N days|weeks|months|quarters|years,
       every Nth day [of month], every Nth day of week.

       Examples:


       -p "bimonthly from 2008"
       -p "every 2 weeks"
       -p "every 5 days from 1/3"

       Show  historical balances at end of 15th each month (N is exclusive end
       date):

       hledger balance -H -p "every 16th day"

       Group postings from start of wednesday to end of  next  tuesday  (N  is
       start date and exclusive end date):

       hledger register checking -p "every 3rd day of week"

   Regular expressions
       hledger uses regular expressions in a number of places:

       o query  terms, on the command line and in the hledger-web search form:
         REGEX, desc:REGEX, cur:REGEX, tag:...=REGEX

       o CSV rules conditional blocks: if REGEX ...

       o account alias directives  and  options:  alias /REGEX/ = REPLACEMENT,
         --alias /REGEX/=REPLACEMENT

       hledger's  regular  expressions  come  from the regex-tdfa library.  In
       general they:

       o are case insensitive

       o are infix matching (do not need  to  match  the  entire  thing  being
         matched)

       o are POSIX extended regular expressions

       o also support GNU word boundaries (\<, \>, \b, \B)

       o and  parenthesised  capturing  groups  and  numeric backreferences in
         replacement strings

       o do not support mode modifiers like (?s)

       Some things to note:

       o In the alias directive and --alias option, regular  expressions  must
         be  enclosed  in  forward  slashes  (/REGEX/).  Elsewhere in hledger,
         these are not required.

       o To match a regular expression metacharacter like $ as a literal char-
         acter, prepend a backslash.  Eg to search for amounts with the dollar
         sign in hledger-web, write cur:\$.

       o On the command line, some metacharacters like $ have a special  mean-
         ing to the shell and so must be escaped a second time, with single or
         double quotes or another backslash.  Eg, to match  amounts  with  the
         dollar sign from the command line, write cur:'\$' or cur:\\$.

QUERIES
       One  of  hledger's strengths is being able to quickly report on precise
       subsets of your data.  Most commands accept an optional  query  expres-
       sion,  written  as arguments after the command name, to filter the data
       by date, account name or other criteria.  The syntax is  similar  to  a
       web search: one or more space-separated search terms, quotes to enclose
       whitespace, optional  prefixes  to  match  specific  fields.   Multiple
       search terms are combined as follows:

       All  commands  except  print: show transactions/postings/accounts which
       match (or negatively match)

       o any of the description terms AND

       o any of the account terms AND

       o all the other terms.

       The print command: show transactions which

       o match any of the description terms AND

       o have any postings matching any of the positive account terms AND

       o have no postings matching any of the negative account terms AND

       o match all the other terms.

       The following kinds of search terms can be used:

       REGEX  match account names by this regular expression

       acct:REGEX
              same as above

       amt:N, amt:<N, amt:<=N, amt:>N, amt:>=N
              match postings with a single-commodity amount that is equal  to,
              less  than, or greater than N.  (Multi-commodity amounts are not
              tested, and will always match.) The comparison has two modes: if
              N is preceded by a + or - sign (or is 0), the two signed numbers
              are compared.  Otherwise, the absolute magnitudes are  compared,
              ignoring sign.

       code:REGEX
              match by transaction code (eg check number)

       cur:REGEX
              match  postings or transactions including any amounts whose cur-
              rency/commodity symbol is fully matched by REGEX.  (For  a  par-
              tial match, use .*REGEX.*).  Note, to match characters which are
              regex-significant, like the dollar sign ($), you need to prepend
              \.   And  when  using  the command line you need to add one more
              level  of  quoting  to  hide  it  from  the  shell,  so  eg  do:
              hledger print cur:'\$' or hledger print cur:\\$.

       desc:REGEX
              match transaction descriptions

       date:PERIODEXPR
              match dates within the specified period.  PERIODEXPR is a period
              expression (with  no  report  interval).   Examples:  date:2016,
              date:thismonth,   date:2000/2/1-2/15,  date:lastweek-.   If  the
              --date2 command line flag is  present,  this  matches  secondary
              dates instead.

       date2:PERIODEXPR
              match secondary dates within the specified period.

       depth:N
              match  (or  display,  depending on command) accounts at or above
              this depth

       real:, real:0
              match real or virtual postings respectively

       status:*, status:!, status:
              match  cleared,  pending,  or   uncleared/pending   transactions
              respectively

       tag:REGEX[=REGEX]
              match  by  tag  name,  and optionally also by tag value.  Note a
              tag: query is considered to match a transaction  if  it  matches
              any  of  the  postings.  Also remember that postings inherit the
              tags of their parent transaction.

       not:   before any of the above negates the match.

       inacct:ACCTNAME
              a special term used automatically when you click an account name
              in hledger-web, specifying the account register we are currently
              in (selects the transactions of that account  and  how  to  show
              them,  can  be  filtered  further with acct etc).  Not supported
              elsewhere in hledger.

       Some of these can also be expressed as command-line options (eg depth:2
       is  equivalent  to --depth 2).  Generally you can mix options and query
       arguments, and the resulting query will be their intersection  (perhaps
       excluding the -p/--period option).

COMMANDS
       hledger  provides  a  number  of subcommands; hledger with no arguments
       shows a list.

       If you install additional hledger-* packages, or if you put programs or
       scripts  named  hledger-NAME in your PATH, these will also be listed as
       subcommands.

       Run  a  subcommand  by  writing  its  name  as   first   argument   (eg
       hledger incomestatement).  You can also write any unambiguous prefix of
       a command name (hledger inc), or one of the standard short aliases dis-
       played in the command list (hledger is).

   accounts
       Show account names.

       --tree show short account names, as a tree

       --flat show full account names, as a list (default)

       --drop=N
              in flat mode: omit N leading account name parts

       This  command  lists  all  account  names  that are in use (ie, all the
       accounts which have at least one transaction posting  to  them).   With
       query arguments, only matched account names are shown.

       It  shows  a flat list by default.  With --tree, it uses indentation to
       show the account hierarchy.

       In flat mode you can add --drop N to omit the first  few  account  name
       components.

       Examples:

              $ hledger accounts --tree
              assets
                bank
                  checking
                  saving
                cash
              expenses
                food
                supplies
              income
                gifts
                salary
              liabilities
                debts

              $ hledger accounts --drop 1
              bank:checking
              bank:saving
              cash
              food
              supplies
              gifts
              salary
              debts

              $ hledger accounts
              assets:bank:checking
              assets:bank:saving
              assets:cash
              expenses:food
              expenses:supplies
              income:gifts
              income:salary
              liabilities:debts

   activity
       Show an ascii barchart of posting counts per interval.

       The  activity  command  displays an ascii histogram showing transaction
       counts by day, week, month or other reporting interval (by day  is  the
       default).  With query arguments, it counts only matched transactions.

              $ hledger activity --quarterly
              2008-01-01 **
              2008-04-01 *******
              2008-07-01
              2008-10-01 **

   add
       Prompt for transactions and add them to the journal.

       --no-new-accounts
              don't  allow  creating  new  accounts;  helps prevent typos when
              entering account names

       Many hledger users edit their journals directly with a text editor,  or
       generate  them from CSV.  For more interactive data entry, there is the
       add command, which prompts interactively on the console for new  trans-
       actions,  and  appends  them to the journal file (if there are multiple
       -f FILE options, the first file is used.) Existing transactions are not
       changed.   This  is the only hledger command that writes to the journal
       file.

       To use it, just run hledger add and follow the prompts.  You can add as
       many  transactions as you like; when you are finished, enter . or press
       control-d or control-c to exit.

       Features:

       o add tries to provide useful defaults, using the most  similar  recent
         transaction (by description) as a template.

       o You can also set the initial defaults with command line arguments.

       o Readline-style edit keys can be used during data entry.

       o The tab key will auto-complete whenever possible - accounts, descrip-
         tions, dates (yesterday, today, tomorrow).   If  the  input  area  is
         empty, it will insert the default value.

       o If  the  journal defines a default commodity, it will be added to any
         bare numbers entered.

       o A parenthesised transaction code may be entered following a date.

       o Comments and tags may be entered following a description or amount.

       o If you make a mistake, enter < at any prompt to restart the  transac-
         tion.

       o Input  prompts  are displayed in a different colour when the terminal
         supports it.

       Example (see the tutorial for a detailed explanation):

              $ hledger add
              Adding transactions to journal file /src/hledger/data/sample.journal
              Any command line arguments will be used as defaults.
              Use tab key to complete, readline keys to edit, enter to accept defaults.
              An optional (CODE) may follow transaction dates.
              An optional ; COMMENT may follow descriptions or amounts.
              If you make a mistake, enter < at any prompt to restart the transaction.
              To end a transaction, enter . when prompted.
              To quit, enter . at a date prompt or press control-d or control-c.
              Date [2015/05/22]:
              Description: supermarket
              Account 1: expenses:food
              Amount  1: $10
              Account 2: assets:checking
              Amount  2 [$-10.0]:
              Account 3 (or . or enter to finish this transaction): .
              2015/05/22 supermarket
                  expenses:food             $10
                  assets:checking        $-10.0

              Save this transaction to the journal ? [y]:
              Saved.
              Starting the next transaction (. or ctrl-D/ctrl-C to quit)
              Date [2015/05/22]: <CTRL-D> $

   balance
       Show accounts and their balances.  Alias: bal.

       --change
              show balance change in each period (default)

       --cumulative
              show balance change accumulated across periods  (in  multicolumn
              reports)

       -H --historical
              show historical ending balance in each period (includes postings
              before report start date)

       --tree show accounts as a tree; amounts include subaccounts (default in
              simple reports)

       --flat show accounts as a list; amounts exclude subaccounts except when
              account is depth-clipped (default in multicolumn reports)

       -V --value
              convert amounts to current market value in their default  valua-
              tion commodity

       -A --average
              show a row average column (in multicolumn mode)

       -T --row-total
              show a row total column (in multicolumn mode)

       -N --no-total
              don't show the final total row

       --drop=N
              omit N leading account name parts (in flat mode)

       --no-elide
              don't squash boring parent accounts (in tree mode)

       --format=LINEFORMAT
              in single-column balance reports: use this custom line format

       -O FMT --output-format=FMT
              select the output format.  Supported formats: txt, csv.

       -o FILE --output-file=FILE
              write  output  to  FILE.   A  file extension matching one of the
              above formats selects that format.

       The balance command displays accounts and balances.   It  is  hledger's
       most featureful and most useful command.

              $ hledger balance
                               $-1  assets
                                $1    bank:saving
                               $-2    cash
                                $2  expenses
                                $1    food
                                $1    supplies
                               $-2  income
                               $-1    gifts
                               $-1    salary
                                $1  liabilities:debts
              --------------------
                                 0

       More  precisely, the balance command shows the change to each account's
       balance caused by all (matched) postings.  In the common case where you
       do  not  filter  by date and your journal sets the correct opening bal-
       ances, this is the same as the account's ending balance.

       By default, accounts are  displayed  hierarchically,  with  subaccounts
       indented below their parent.  "Boring" accounts, which contain a single
       interesting subaccount and no balance of their own, are elided into the
       following  line  for  more  compact output.  (Use --no-elide to prevent
       this.)

       Each account's balance is the "inclusive" balance  -  it  includes  the
       balances of any subaccounts.

       Accounts  which  have  zero  balance  (and no non-zero subaccounts) are
       omitted.  Use -E/--empty to show them.

       A final total is displayed by default; use  -N/--no-total  to  suppress
       it:

              $ hledger balance -p 2008/6 expenses --no-total
                                $2  expenses
                                $1    food
                                $1    supplies

   Flat mode
       To see a flat list of full account names instead of the default hierar-
       chical  display,  use  --flat.   In   this   mode,   accounts   (unless
       depth-clipped) show their "exclusive" balance, excluding any subaccount
       balances.  In this mode, you can also use --drop N to  omit  the  first
       few account name components.

              $ hledger balance -p 2008/6 expenses -N --flat --drop 1
                                $1  food
                                $1  supplies

   Depth limited balance reports
       With  --depth N,  balance  shows  accounts only to the specified depth.
       This is very useful to show  a  complex  charts  of  accounts  in  less
       detail.   In  flat  mode,  balances from accounts below the depth limit
       will be shown as part of a parent account at the depth limit.

              $ hledger balance -N --depth 1
                               $-1  assets
                                $2  expenses
                               $-2  income
                                $1  liabilities

   Multicolumn balance reports
       With a reporting interval, multiple balance columns will be shown,  one
       for  each report period.  There are three types of multi-column balance
       report, showing different information:

       1. By default: each column shows the sum of postings in that period, ie
          the  account's  change of balance in that period.  This is useful eg
          for a monthly income statement:

                  $ hledger balance --quarterly income expenses -E
                  Balance changes in 2008:

                                     ||  2008q1  2008q2  2008q3  2008q4
                  ===================++=================================
                   expenses:food     ||       0      $1       0       0
                   expenses:supplies ||       0      $1       0       0
                   income:gifts      ||       0     $-1       0       0
                   income:salary     ||     $-1       0       0       0
                  -------------------++---------------------------------
                                     ||     $-1      $1       0       0

       2. With --cumulative: each column shows the  ending  balance  for  that
          period,  accumulating the changes across periods, starting from 0 at
          the report start date:

                  $ hledger balance --quarterly income expenses -E --cumulative
                  Ending balances (cumulative) in 2008:

                                     ||  2008/03/31  2008/06/30  2008/09/30  2008/12/31
                  ===================++=================================================
                   expenses:food     ||           0          $1          $1          $1
                   expenses:supplies ||           0          $1          $1          $1
                   income:gifts      ||           0         $-1         $-1         $-1
                   income:salary     ||         $-1         $-1         $-1         $-1
                  -------------------++-------------------------------------------------
                                     ||         $-1           0           0           0

       3. With --historical/-H: each column shows the actual historical ending
          balance  for  that  period, accumulating the changes across periods,
          starting from the actual balance at the report start date.  This  is
          useful eg for a multi-period balance sheet, and when you are showing
          only the data after a certain start date:

                  $ hledger balance ^assets ^liabilities --quarterly --historical --begin 2008/4/1
                  Ending balances (historical) in 2008/04/01-2008/12/31:

                                        ||  2008/06/30  2008/09/30  2008/12/31
                  ======================++=====================================
                   assets:bank:checking ||          $1          $1           0
                   assets:bank:saving   ||          $1          $1          $1
                   assets:cash          ||         $-2         $-2         $-2
                   liabilities:debts    ||           0           0          $1
                  ----------------------++-------------------------------------
                                        ||           0           0           0

       Multi-column balance reports display accounts in flat mode by  default;
       to see the hierarchy, use --tree.

       With   a  reporting  interval  (like  --quarterly  above),  the  report
       start/end dates will be adjusted if necessary so  that  they  encompass
       the displayed report periods.  This is so that the first and last peri-
       ods will be "full" and comparable to the others.

       The -E/--empty flag does two things  in  multicolumn  balance  reports:
       first,  the  report  will  show all columns within the specified report
       period (without -E, leading and trailing columns with  all  zeroes  are
       not  shown).   Second,  all  accounts which existed at the report start
       date will be considered, not just the ones  with  activity  during  the
       report period (use -E to include low-activity accounts which would oth-
       erwise would be omitted).

       The -T/--row-total flag adds an additional column showing the total for
       each row.

       The  -A/--average  flag adds a column showing the average value in each
       row.

       Here's an example of all three:

              $ hledger balance -Q income expenses --tree -ETA
              Balance changes in 2008:

                          ||  2008q1  2008q2  2008q3  2008q4    Total  Average
              ============++===================================================
               expenses   ||       0      $2       0       0       $2       $1
                 food     ||       0      $1       0       0       $1        0
                 supplies ||       0      $1       0       0       $1        0
               income     ||     $-1     $-1       0       0      $-2      $-1
                 gifts    ||       0     $-1       0       0      $-1        0
                 salary   ||     $-1       0       0       0      $-1        0
              ------------++---------------------------------------------------
                          ||     $-1      $1       0       0        0        0

              # Average is rounded to the dollar here since all journal amounts are

   Market value
       The -V/--value flag converts all the reported amounts to their "current
       market  value"  using  their  default market price.  That is the latest
       market price (P directive) found in the journal (or an included  file),
       for the amount's commodity, dated on or before the report end date.

       Unlike Ledger, hledger's -V only uses the market prices recorded with P
       directives, ignoring transaction prices recorded  as  part  of  posting
       amounts (which -B/--cost uses).  Using -B and -V together is allowed.

   Custom balance output
       In  simple  (non-multi-column)  balance  reports, you can customise the
       output with --format FMT:

              $ hledger balance --format "%20(account) %12(total)"
                            assets          $-1
                       bank:saving           $1
                              cash          $-2
                          expenses           $2
                              food           $1
                          supplies           $1
                            income          $-2
                             gifts          $-1
                            salary          $-1
                 liabilities:debts           $1
              ---------------------------------
                                              0

       The FMT format string (plus a newline) specifies the formatting applied
       to  each  account/balance pair.  It may contain any suitable text, with
       data fields interpolated like so:

       %[MIN][.MAX](FIELDNAME)

       o MIN pads with spaces to at least this width (optional)

       o MAX truncates at this width (optional)

       o FIELDNAME must be enclosed in parentheses, and can be one of:

         o depth_spacer - a number of spaces equal to the account's depth,  or
           if MIN is specified, MIN * depth spaces.

         o account - the account's name

         o total - the account's balance/posted total, right justified

       Also,  FMT  can begin with an optional prefix to control how multi-com-
       modity amounts are rendered:

       o %_ - render on multiple lines, bottom-aligned (the default)

       o %^ - render on multiple lines, top-aligned

       o %, - render on one line, comma-separated

       There are some quirks.  Eg in one-line  mode,  %(depth_spacer)  has  no
       effect, instead %(account) has indentation built in.
        Experimentation may be needed to get pleasing results.

       Some example formats:

       o %(total) - the account's total

       o %-20.20(account)  -  the account's name, left justified, padded to 20
         characters and clipped at 20 characters

       o %,%-50(account)  %25(total) - account name padded to  50  characters,
         total  padded to 20 characters, with multiple commodities rendered on
         one line

       o %20(total)  %2(depth_spacer)%-(account) - the default format for  the
         single-column balance report

   Output destination
       The  balance, print, register and stats commands can write their output
       to a destination other than the console.  This  is  controlled  by  the
       -o/--output-file option.

              $ hledger balance -o -     # write to stdout (the default)
              $ hledger balance -o FILE  # write to FILE

   CSV output
       The balance, print and register commands can write their output as CSV.
       This is useful for exporting data to other  applications,  eg  to  make
       charts  in a spreadsheet.  This is controlled by the -O/--output-format
       option, or by specifying a .csv file extension with -o/--output-file.

              $ hledger balance -O csv       # write CSV to stdout
              $ hledger balance -o FILE.csv  # write CSV to FILE.csv

   balancesheet
       Show a balance sheet.  Alias: bs.

       --flat show full account names, as a list (default)

       --drop=N
              in flat mode: omit N leading account name parts

       This command displays a simple balance  sheet.   It  currently  assumes
       that  you  have  top-level  accounts  named asset and liability (plural
       forms also allowed.)

              $ hledger balancesheet
              Balance Sheet

              Assets:
                               $-1  assets
                                $1    bank:saving
                               $-2    cash
              --------------------
                               $-1

              Liabilities:
                                $1  liabilities:debts
              --------------------
                                $1

              Total:
              --------------------
                                 0

   cashflow
       Show a cashflow statement.  Alias: cf.

       --flat show full account names, as a list (default)

       --drop=N
              in flat mode: omit N leading account name parts

       This command displays a simple cashflow statement It shows  the  change
       in  all  "cash"  (ie,  liquid assets) accounts for the period.  It cur-
       rently assumes that cash accounts are under a top-level  account  named
       asset and do not contain receivable or A/R (plural forms also allowed.)

              $ hledger cashflow
              Cashflow Statement

              Cash flows:
                               $-1  assets
                                $1    bank:saving
                               $-2    cash
              --------------------
                               $-1

              Total:
              --------------------
                               $-1

   help
       Show any of the hledger manuals.

       The help command displays any of the main hledger man  pages.   (Unlike
       hledger --help,  which displays only the hledger man page.) Run it with
       no arguments to list available topics (their names  are  shortened  for
       easier  typing),  and run hledger help TOPIC to select one.  The output
       is similar to a man page, but fixed width.  It may be long, so you  may
       wish to pipe it into a pager.  See also info and man.

              $ hledger help
              Choose a topic, eg: hledger help cli
              cli, ui, web, api, journal, csv, timeclock, timedot

              $ hledger help cli | less

              hledger(1)                   hledger User Manuals                   hledger(1)



              NAME
                     hledger - a command-line accounting tool

              SYNOPSIS
                     hledger [-f FILE] COMMAND [OPTIONS] [CMDARGS]
                     hledger [-f FILE] ADDONCMD -- [OPTIONS] [CMDARGS]
              :

   incomestatement
       Show an income statement.  Alias: is.

       --flat show full account names, as a list (default)

       --drop=N
              in flat mode: omit N leading account name parts

       This  command displays a simple income statement.  It currently assumes
       that you have top-level accounts named income (or revenue) and  expense
       (plural forms also allowed.)

              $ hledger incomestatement
              Income Statement

              Revenues:
                               $-2  income
                               $-1    gifts
                               $-1    salary
              --------------------
                               $-2

              Expenses:
                                $2  expenses
                                $1    food
                                $1    supplies
              --------------------
                                $2

              Total:
              --------------------
                                 0

   info
       Show any of the hledger manuals using info.

       The  info  command  displays any of the hledger reference manuals using
       the info hypertextual documentation viewer.  This can be a  very  effi-
       cient  way  to browse large manuals.  It requires the "info" program to
       be available in your PATH.

       As with help, run it with no arguments to list available topics  (manu-
       als).

   man
       Show any of the hledger manuals using man.

       The  man  command  displays  any of the hledger reference manuals using
       man, the standard documentation viewer on unix systems.  This will  fit
       the  text to your terminal width, and probably invoke a pager automati-
       cally.  It requires the "man" program to be available in your PATH.

       As with help, run it with no arguments to list available topics  (manu-
       als).

   print
       Show transactions from the journal.

       -m STR --match=STR
              show  the  transaction whose description is most similar to STR,
              and is most recent

       -O FMT --output-format=FMT
              select the output format.  Supported formats: txt, csv.

       -o FILE --output-file=FILE
              write output to FILE.  A file  extension  matching  one  of  the
              above formats selects that format.

              $ hledger print
              2008/01/01 income
                  assets:bank:checking            $1
                  income:salary                  $-1

              2008/06/01 gift
                  assets:bank:checking            $1
                  income:gifts                   $-1

              2008/06/02 save
                  assets:bank:saving              $1
                  assets:bank:checking           $-1

              2008/06/03 * eat & shop
                  expenses:food                $1
                  expenses:supplies            $1
                  assets:cash                 $-2

              2008/12/31 * pay off
                  liabilities:debts               $1
                  assets:bank:checking           $-1

       The  print  command  displays  full transactions from the journal file,
       tidily formatted and showing all amounts  explicitly.   The  output  of
       print  is  always  a valid hledger journal, but it does always not pre-
       serve all original content exactly (eg directives).

       hledger's print command also shows all unit prices in effect, or  (with
       -B/--cost) shows cost amounts.

       The print command also supports output destination and CSV output.

   register
       Show postings and their running total.  Alias: reg.

       --cumulative
              show running total from report start date (default)

       -H --historical
              show  historical running total/balance (includes postings before
              report start date)

       -A --average
              show  running  average  of  posting  amounts  instead  of  total
              (implies --empty)

       -r --related
              show postings' siblings instead

       -w N --width=N
              set  output  width  (default:  terminal width or COLUMNS.  -wN,M
              sets description width as well)

       -O FMT --output-format=FMT
              select the output format.  Supported formats: txt, csv.

       -o FILE --output-file=FILE
              write output to FILE.  A file  extension  matching  one  of  the
              above formats selects that format.

       The register command displays postings, one per line, and their running
       total.  This is typically used with  a  query  selecting  a  particular
       account, to see that account's activity:

              $ hledger register checking
              2008/01/01 income               assets:bank:checking            $1            $1
              2008/06/01 gift                 assets:bank:checking            $1            $2
              2008/06/02 save                 assets:bank:checking           $-1            $1
              2008/12/31 pay off              assets:bank:checking           $-1             0

       The  --historical/-H  flag  adds the balance from any undisplayed prior
       postings to the running total.  This is useful when  you  want  to  see
       only recent activity, with a historically accurate running balance:

              $ hledger register checking -b 2008/6 --historical
              2008/06/01 gift                 assets:bank:checking            $1            $2
              2008/06/02 save                 assets:bank:checking           $-1            $1
              2008/12/31 pay off              assets:bank:checking           $-1             0

       The --depth option limits the amount of sub-account detail displayed.

       The  --average/-A flag shows the running average posting amount instead
       of the running total (so, the final number displayed is the average for
       the  whole  report period).  This flag implies --empty (see below).  It
       is affected by --historical.  It  works  best  when  showing  just  one
       account and one commodity.

       The  --related/-r  flag shows the other postings in the transactions of
       the postings which would normally be shown.

       With a reporting interval, register shows  summary  postings,  one  per
       interval, aggregating the postings to each account:

              $ hledger register --monthly income
              2008/01                 income:salary                          $-1           $-1
              2008/06                 income:gifts                           $-1           $-2

       Periods  with no activity, and summary postings with a zero amount, are
       not shown by default; use the --empty/-E flag to see them:

              $ hledger register --monthly income -E
              2008/01                 income:salary                          $-1           $-1
              2008/02                                                          0           $-1
              2008/03                                                          0           $-1
              2008/04                                                          0           $-1
              2008/05                                                          0           $-1
              2008/06                 income:gifts                           $-1           $-2
              2008/07                                                          0           $-2
              2008/08                                                          0           $-2
              2008/09                                                          0           $-2
              2008/10                                                          0           $-2
              2008/11                                                          0           $-2
              2008/12                                                          0           $-2

       Often, you'll want to see just one  line  per  interval.   The  --depth
       option helps with this, causing subaccounts to be aggregated:

              $ hledger register --monthly assets --depth 1h
              2008/01                 assets                                  $1            $1
              2008/06                 assets                                 $-1             0
              2008/12                 assets                                 $-1           $-1

       Note  when using report intervals, if you specify start/end dates these
       will be adjusted outward if necessary to  contain  a  whole  number  of
       intervals.   This  ensures  that  the first and last intervals are full
       length and comparable to the others in the report.

   Custom register output
       register uses the full terminal width by default,  except  on  windows.
       You  can override this by setting the COLUMNS environment variable (not
       a bash shell variable) or by using the --width/-w option.

       The description and account columns normally share  the  space  equally
       (about  half  of  (width  - 40) each).  You can adjust this by adding a
       description width  as  part  of  --width's  argument,  comma-separated:
       --width W,D .  Here's a diagram:

              <--------------------------------- width (W) ---------------------------------->
              date (10)  description (D)       account (W-41-D)     amount (12)   balance (12)
              DDDDDDDDDD dddddddddddddddddddd  aaaaaaaaaaaaaaaaaaa  AAAAAAAAAAAA  AAAAAAAAAAAA

       and some examples:

              $ hledger reg                     # use terminal width (or 80 on windows)
              $ hledger reg -w 100              # use width 100
              $ COLUMNS=100 hledger reg         # set with one-time environment variable
              $ export COLUMNS=100; hledger reg # set till session end (or window resize)
              $ hledger reg -w 100,40           # set overall width 100, description width 40
              $ hledger reg -w $COLUMNS,40      # use terminal width, and set description width

       The  register  command also supports the -o/--output-file and -O/--out-
       put-format options for controlling output destination and CSV output.

   stats
       Show some journal statistics.

       -o FILE --output-file=FILE
              write output to FILE.  A file  extension  matching  one  of  the
              above formats selects that format.

              $ hledger stats
              Main journal file        : /src/hledger/data/sample.journal
              Included journal files   :
              Transactions span        : 2008-01-01 to 2009-01-01 (366 days)
              Last transaction         : 2008-12-31 (2333 days ago)
              Transactions             : 5 (0.0 per day)
              Transactions last 30 days: 0 (0.0 per day)
              Transactions last 7 days : 0 (0.0 per day)
              Payees/descriptions      : 5
              Accounts                 : 8 (depth 3)
              Commodities              : 1 ($)

       The  stats  command displays summary information for the whole journal,
       or a matched part of it.  With a reporting interval, it shows a  report
       for each report period.

       The stats command also supports -o/--output-file for controlling output
       destination.

   test
       Run built-in unit tests.

              $ hledger test
              Cases: 74  Tried: 74  Errors: 0  Failures: 0

       This command runs hledger's built-in unit tests and  displays  a  quick
       report.  With a regular expression argument, it selects only tests with
       matching names.  It's mainly used in development, but it's also nice to
       be able to check your hledger executable for smoke at any time.

ADD-ON COMMANDS
       Add-on  commands  are  executables  in your PATH whose name starts with
       hledger-  and  ends  with  any  of   these   file   extensions:   none,
       .hs,.lhs,.pl,.py,.rb,.rkt,.sh,.bat,.com,.exe.   Also,  an add-on's name
       may not be the same as any built-in command or alias.

       hledger will detect these and include them in the command list and  let
       you  invoke them with hledger ADDONCMD.  However there are some limita-
       tions:

       o Options appearing before ADDONCMD will be visible only to hledger and
         will not be passed to the add-on.  Eg: hledger -h web shows hledger's
         usage, hledger web -h shows hledger-web's usage.

       o Options understood only by the add-on must go after a -- argument  to
         hide  them  from  hledger,  which  would  otherwise reject them.  Eg:
         hledger web -- --server.

       Sometimes it may be more convenient to just run  the  add-on  directly,
       eg: hledger-web --server.

       Add-ons  which  are  written  in  haskell  can  take  advantage  of the
       hledger-lib  library  for  journal  parsing,  reporting,   command-line
       options, etc.

       Here  are some hledger add-ons available from Hackage, the extra direc-
       tory in the hledger source, or elsewhere:

   api
       Web API server, see hledger-api.

   autosync
       Download OFX bank data and/or convert OFX to hledger journal format.

              $ hledger autosync --help
              usage: hledger-autosync [-h] [-m MAX] [-r] [-a ACCOUNT] [-l LEDGER] [-i INDENT]
                                      [--initial] [--fid FID] [--assertions] [-d] [--hledger]
                                      [--slow] [--which]
                                      [PATH]

              Synchronize ledger.

              positional arguments:
                PATH                  do not sync; import from OFX file

              optional arguments:
                -h, --help            show this help message and exit
                -m MAX, --max MAX     maximum number of days to process
                -r, --resync          do not stop until max days reached
                -a ACCOUNT, --account ACCOUNT
                                      set account name for import
                -l LEDGER, --ledger LEDGER
                                      specify ledger file to READ for syncing
                -i INDENT, --indent INDENT
                                      number of spaces to use for indentation
                --initial             create initial balance entries
                --fid FID             pass in fid value for OFX files that do not supply it
                --assertions          create balance assertion entries
                -d, --debug           enable debug logging
                --hledger             force use of hledger (on by default if invoked as hledger-
                                      autosync)
                --slow                use slow, but possibly more robust, method of calling ledger
                                      (no subprocess)
                --which               display which version of ledger/hledger/ledger-python will
                                      be used by ledger-autosync to check for previous
                                      transactions
              $ head acct1.ofx
              OFXHEADER:100
              DATA:OFXSGML
              VERSION:102
              SECURITY:NONE
              ENCODING:USASCII
              CHARSET:1252
              COMPRESSION:NONE
              OLDFILEUID:NONE
              NEWFILEUIDe:8509488b59d1bb45

              $ hledger autosync acct1.ofx
              2013/08/30 MONTHLY SERVICE FEE
                  ; ofxid: 3000.4303001832.201308301
                  WF:4303001832                               -$6.00
                  [assets:business:bank:wf:bchecking:banking]  $6.00

       ledger-autosync, which includes  a  hledger-autosync  alias,  downloads
       transactions from your bank(s) via OFX, and prints just the new ones as
       journal entries which you can add to your journal.  It can also operate
       on  .OFX  files  which  you've  downloaded  manually.  It can be a nice
       alternative to hledger's built-in CSV reader, especially if  your  bank
       supports OFX download.

   diff
       Show transactions present in one journal file but not another

              $ hledger diff --help
              Usage: hledger-diff account:name left.journal right.journal
              $ cat a.journal
              1/1
               (acct:one)  1

              $ cat b.journal
              1/1
               (acct:one)  1
              2/2
               (acct:two)  2

              $ hledger diff acct:two a.journal b.journal
              Unmatched transactions in the first journal:

              Unmatched transactions in the second journal:

              2015/02/02
                  (acct:two)            $2

       hledger-diff  compares  two  journal  files.  Given an account name, it
       prints out the transactions affecting that account  which  are  in  one
       journal  file but not in the other.  This can be useful for reconciling
       existing journals with bank statements.

   equity
       Print a journal entry that resets account balances to zero.

              $ hledger balance --flat -E assets liabilities
                                 0  assets:bank:checking
                                $1  assets:bank:saving
                               $-2  assets:cash
                                $1  liabilities:debts
              --------------------
                                 0
              $ hledger equity assets liabilities
              2015/05/23
                  assets:bank:saving                $-1
                  assets:cash                        $2
                  liabilities:debts                 $-1
                  equity:closing balances             0

              2015/05/23
                  assets:bank:saving                 $1
                  assets:cash                       $-2
                  liabilities:debts                  $1
                  equity:opening balances             0

       This prints a journal entry which zeroes out the specified accounts (or
       all  accounts)  with a transfer to/from "equity:closing balances" (like
       Ledger's equity command).  Also, it prints an similar entry with  oppo-
       site sign for restoring the balances from "equity:opening balances".

       These can be useful for ending one journal file and starting a new one,
       respectively.  By zeroing your asset and liability accounts at the  end
       of a file and restoring them at the start of the next one, you will see
       correct asset/liability balances whether you run hledger  on  just  one
       file, or on several files concatenated with include.

   interest
       Generate interest transactions.

              $ hledger interest --help
              Usage: hledger-interest [OPTION...] ACCOUNT
                -h          --help            print this message and exit
                -V          --version         show version number and exit
                -v          --verbose         echo input ledger to stdout (default)
                -q          --quiet           don't echo input ledger to stdout
                            --today           compute interest up until today
                -f FILE     --file=FILE       input ledger file (pass '-' for stdin)
                -s ACCOUNT  --source=ACCOUNT  interest source account
                -t ACCOUNT  --target=ACCOUNT  interest target account
                            --act             use 'act' day counting convention
                            --30-360          use '30/360' day counting convention
                            --30E-360         use '30E/360' day counting convention
                            --30E-360isda     use '30E/360isda' day counting convention
                            --constant=RATE   constant interest rate
                            --annual=RATE     annual interest rate
                            --bgb288          compute interest according to German BGB288
                            --ing-diba        compute interest according for Ing-Diba Tagesgeld account

              $ cat interest.journal
              2008/09/26 Loan
                   Assets:Bank          EUR 10000.00
                   Liabilities:Bank

              2008/11/27 Payment
                   Assets:Bank          EUR -3771.12
                   Liabilities:Bank

              2009/05/03 Payment
                   Assets:Bank          EUR -1200.00
                   Liabilities:Bank

              2010/12/10 Payment
                   Assets:Bank          EUR -3700.00
                   Liabilities:Bank

              $ hledger interest -- -f interest.journal --source=Expenses:Interest \
                  --target=Liabilities:Bank --30-360 --annual=0.05 Liabilities:Bank
              2008/09/26 Loan
                  Assets:Bank       EUR 10000.00
                  Liabilities:Bank  EUR -10000.00

              2008/11/27 0.05% interest for EUR -10000.00 over 61 days
                  Liabilities:Bank     EUR -84.72
                  Expenses:Interest     EUR 84.72

              2008/11/27 Payment
                  Assets:Bank       EUR -3771.12
                  Liabilities:Bank   EUR 3771.12

              2008/12/31 0.05% interest for EUR -6313.60 over 34 days
                  Liabilities:Bank     EUR -29.81
                  Expenses:Interest     EUR 29.81

              2009/05/03 0.05% interest for EUR -6343.42 over 123 days
                  Liabilities:Bank    EUR -108.37
                  Expenses:Interest    EUR 108.37

              2009/05/03 Payment
                  Assets:Bank       EUR -1200.00
                  Liabilities:Bank   EUR 1200.00

              2009/12/31 0.05% interest for EUR -5251.78 over 238 days
                  Liabilities:Bank    EUR -173.60
                  Expenses:Interest    EUR 173.60

              2010/12/10 0.05% interest for EUR -5425.38 over 340 days
                  Liabilities:Bank    EUR -256.20
                  Expenses:Interest    EUR 256.20

              2010/12/10 Payment
                  Assets:Bank       EUR -3700.00
                  Liabilities:Bank   EUR 3700.00

       hledger-interest computes interests for a given account.  Using command
       line flags, the program can be configured to use  various  schemes  for
       day-counting,  such  as act/act, 30/360, 30E/360, and 30/360isda.  Fur-
       thermore, it supports  a  (small)  number  of  interest  schemes,  i.e.
       annual interest with a fixed rate and the scheme mandated by the German
       BGB288 (Basiszins fr Verbrauchergeschfte).  See the  package  page  for
       more.

   irr
       Calculate internal rate of return.

              $ hledger irr --help
              Usage: hledger-irr [OPTION...]
                -h          --help                        print this message and exit
                -V          --version                     show version number and exit
                -c          --cashflow                    also show all revant transactions
                -f FILE     --file=FILE                   input ledger file (pass '-' for stdin)
                -i ACCOUNT  --investment-account=ACCOUNT  investment account
                -t ACCOUNT  --interest-account=ACCOUNT    interest/gain/fees/losses account
                -b DATE     --begin=DATE                  calculate interest from this date
                -e DATE     --end=DATE                    calculate interest until this date
                -D          --daily                       calculate interest for each day
                -W          --weekly                      calculate interest for each week
                -M          --monthly                     calculate interest for each month
                -Y          --yearly                      calculate interest for each year

              $ cat irr.journal
              2011-01-01 Some wild speculation - I wonder if it pays off
                 Speculation   100.00
                 Cash

              2011-02-01 More speculation (and adjustment of value)
                 Cash         -10.00
                 Rate Gain     -1.00
                 Speculation

              2011-03-01 Lets pull out some money (and adjustment of value)
                 Cash          30.00
                 Rate Gain     -3.00
                 Speculation

              2011-04-01 More speculation (and it lost some money!)
                 Cash         -50.00
                 Rate Gain      5.00
                 Speculation

              2011-05-01 Getting some money out (and adjustment of value)
                 Speculation  -44.00
                 Rate Gain    - 3.00
                 Cash

              2011-06-01 Emptying the account (after adjusting the value)
                 Speculation   -85.00
                 Cash           90.00
                 Rate Gain     - 5.00

              $ hledger-irr -f irr.journal -t "Rate Gain" -i Speculation  --monthly
              2011/01/01 - 2011/02/01: 12.49%
              2011/02/01 - 2011/03/01: 41.55%
              2011/03/01 - 2011/04/01: -51.44%
              2011/04/01 - 2011/05/01: 32.24%
              2011/05/01 - 2011/06/01: 95.92%

       hledger-irr  computes  the  internal  rate of return, also known as the
       effective interest rate, of a given investment.  After specifying  what
       account  holds  the  investment,  and what account stores the gains (or
       losses, or fees, or cost), it calculates the hypothetical  annual  rate
       of  fixed  rate investment that would have provided the exact same cash
       flow.  See the package page for more.

   print-unique
       Print only only journal entries which have a unique description.

              $ cat unique.journal
              1/1 test
               (acct:one)  1
              2/2 test
               (acct:two)  2
              $ LEDGER_FILE=unique.journal hledger print-unique
              (-f option not supported)
              2015/01/01 test
                  (acct:one)             1

   rewrite
       Prints all journal entries, adding specified custom postings to matched
       entries.

       hledger-rewrite.hs,   in   hledger's   extra   directory   (compilation
       optional), adds postings to existing transactions, optionally  with  an
       amount  based  on  the  existing  transaction's  first amount.  See the
       script for more details.

              $ hledger rewrite -- [QUERY]        --add-posting "ACCT  AMTEXPR" ...
              $ hledger rewrite -- ^income        --add-posting '(liabilities:tax)  *.33'
              $ hledger rewrite -- expenses:gifts --add-posting '(budget:gifts)  *-1"'

   ui
       Curses-style interface, see hledger-ui.

   web
       Web interface, see hledger-web.

TROUBLESHOOTING
   Run-time problems
       Here are some issues you might encounter  when  you  run  hledger  (and
       remember  you can also seek help from the IRC channel, mail list or bug
       tracker):

       Successfully installed, but "No command 'hledger' found"
       stack and cabal install binaries into a special directory, which should
       be  added  to your PATH environment variable.  Eg on unix-like systems,
       that is ~/.local/bin and ~/.cabal/bin respectively.

       I set a custom LEDGER_FILE, but hledger is still using the default file
       LEDGER_FILE  should  be  a  real environment variable, not just a shell
       variable.  The command env | grep LEDGER_FILE should show it.  You  may
       need to use export.  Here's an explanation.

       "Illegal  byte  sequence"  or  "Invalid or incomplete multibyte or wide
       character" errors
       In order to handle non-ascii letters and symbols (like ), hledger needs
       an appropriate locale.  This is usually configured system-wide; you can
       also configure it temporarily.  The locale may need to be one that sup-
       ports  UTF-8,  if you built hledger with GHC < 7.2 (or possibly always,
       I'm not sure yet).

       Here's  an  example  of  setting  the  locale  temporarily,  on  ubuntu
       gnu/linux:

              $ file my.journal
              my.journal: UTF-8 Unicode text                 # <- the file is UTF8-encoded
              $ locale -a
              C
              en_US.utf8                             # <- a UTF8-aware locale is available
              POSIX
              $ LANG=en_US.utf8 hledger -f my.journal print   # <- use it for this command

       Here's one way to set it permanently, there are probably better ways:

              $ echo "export LANG=en_US.UTF-8" >>~/.bash_profile
              $ bash --login

       If  we  preferred  to  use eg fr_FR.utf8, we might have to install that
       first:

              $ apt-get install language-pack-fr
              $ locale -a
              C
              en_US.utf8
              fr_BE.utf8
              fr_CA.utf8
              fr_CH.utf8
              fr_FR.utf8
              fr_LU.utf8
              POSIX
              $ LANG=fr_FR.utf8 hledger -f my.journal print

       Note some platforms allow variant locale spellings, but not all (ubuntu
       accepts fr_FR.UTF8, mac osx requires exactly fr_FR.UTF-8).

   Known limitations
       Command line interface

       Add-on  command  options,  unless  they are also understood by the main
       hledger  executable,   must   be   written   after   --,   like   this:
       hledger web -- --server

       Differences from Ledger

       Not  all of Ledger's journal file syntax is supported.  See file format
       differences.

       hledger is slower than Ledger, and uses  more  memory,  on  large  data
       files.

       Windows limitations

       In  a windows CMD window, non-ascii characters and colours are not sup-
       ported.

       In a windows Cygwin/MSYS/Mintty window, the tab key is not supported in
       hledger add.

ENVIRONMENT
       COLUMNS  The  screen  width used by the register command.  Default: the
       full terminal width.

       LEDGER_FILE The journal file path when not specified with -f.  Default:
       ~/.hledger.journal  (on  windows,  perhaps C:/Users/USER/.hledger.jour-
       nal).

FILES
       Reads data from one or more files in hledger journal, timeclock,  time-
       dot,   or   CSV   format   specified   with  -f,  or  $LEDGER_FILE,  or
       $HOME/.hledger.journal          (on          windows,           perhaps
       C:/Users/USER/.hledger.journal).

BUGS
       The  need  to precede options with -- when invoked from hledger is awk-
       ward.

       hledger can't render non-ascii characters when run from a Windows  com-
       mand prompt (up to Windows 7 at least).

       When input data contains non-ascii characters, a suitable system locale
       must be configured (or there will be an unhelpful error).  Eg on POSIX,
       set LANG to something other than C.



REPORTING BUGS
       Report  bugs at http://bugs.hledger.org (or on the #hledger IRC channel
       or hledger mail list)


AUTHORS
       Simon Michael <simon@joyful.com> and contributors


COPYRIGHT
       Copyright (C) 2007-2016 Simon Michael.
       Released under GNU GPL v3 or later.


SEE ALSO
       hledger(1),     hledger-ui(1),     hledger-web(1),      hledger-api(1),
       hledger_csv(5), hledger_journal(5), hledger_timeclock(5), hledger_time-
       dot(5), ledger(1)

       http://hledger.org



hledger 1.0                      October 2016                       hledger(1)
